HDD Regenerator 2011 Bootable ISO

Program features

Fast hard drive problems detection.

Ability to detect physical bad sectors on a hard disk drive surface.

Ability to repair bad sectors (magnetic errors) on a hard disk surface using Hysteresis loops generator.*

*This recovery technology is originally developed by Dmitriy Primochenko

No data losses in any mode!

Corrupted data recovery (making unreadable data readable)

User friendly intuitive interface

Easy to use, no complex settings. You do not need to change a lot of complicated and unnecessary settings. We have already set up the product for you for best performance and results.

The product ignores file system, scans disk at physical level. It can be used with FAT, NTFS or any other file system, and also with unformatted or unpartitioned disks.

Drive statistics

Starting process directly under Windows XP/Vista/7/8/10

Bootable regenerating flash can be created from the program and used to automatically start regenerating process.

Bootable regenerating CD / DVD allows starting regenerating process under DOS automatically.

Working with any existing file system without losses of any data

Working with any operating system without losses of any data (bootable regenerating CD / DVD or flash should be used for non-Windows operating systems)

Prescan mode (very useful for fast determination of bad sectors location, if a hard drive has a large number of bad sectors. Saves your time. Bad hard drives are scanned in this mode even faster than good drives!)

Normal scan mode has faster scanning speed

4K sector size support

Automatic process resume in any mode (except CD/DVD)

Multiple hard drives better support

Real-time hard drive status monitor. HDD Regenerator realtime monitor is more poweful and precise than ever in timely prediction of hard drive problems. (Popup balloon messages are currently not working under Windows 10. Please use the HDD Regenerator's S.M.A.R.T. menu button instead, allowing to check a real-time hard drive state under Windows 10.)

How to Use:

1.)  Select the Hard Disk you want to scan. input a number then press "Enter"



2.)  Select Number input "2" to normal scan

3.)    Select Number input "1" to scan and repair

4.)   Select Number input "1" to start at the beginning of the sector

5.) Well Done!, your hard drive now is on scan.. wait and have patience :)

*Note*:  if you see hard disk is not detected.. make sure you don't stop or pause the operation, because it is the indicator that a bad sector has been detected..

that is all, thanks for reading..

Get It Here HDD Regenerator 2011 Bootable ISO